For interior cleaning, lighter staining, and surface cleaning, we recommend Mold & Mildew Stain Surface Cleaner. This cleaner will perform with minimal odor and 30x less chemical than competitor products.

Heavier areas of contamination or surface cleaning may require the use of Dot Extra Strength Mold Stain Remover. This product will rapidly remove staining and soiling with lower odor, while still using 4x less chemical.

• Mold & Mildew Stain Surface Cleaner or Extra Strength Mold Stain Remover

• Scissors/Knife

• Power Drill + Paint Mixer

• Mixing Bucket

• Preferred Spraying Equipment (Powered Systems Recommended for Tougher Jobs)

• Rags, Microfiber Towels, and Mops

• Trash bag(s)

• PPE

Dot is designed to remove mold and other organic stains through oxidation. There are other types of stains you may find on wood that will not be removed by Dot or any oxidation methods. These stains include:

• Water staining/marking in wood

• Rust and/or iron oxide in wood. Iron oxide reacts with tannins in wood materials to form dark black staining that flows from nails or metal components.

• Inks, dyes, or grease staining

All confined space work should be done with two people and workers should wear appropriate PPE for the space and job.

1. You should plan on approximately 1 gallon of mixed product per 500 square feet of floor space. Smaller areas, such as a standard bathroom ceiling, can generally be cleaned with a quart of cleaning product or less.

2. Protect items in the home and other surfaces. Dot is a powerful oxidation-based cleaner that can cause color loss or discoloration in textiles that are not color-fast (cotton, nylon). Cover carpeting, furniture, and other items prone to bleaching. When applying to colored drywall, some discoloration may occur.

Dot® pouches are split into two sides: Side A contains an Oxidizer, and Side B contains our patented Activator. When our patented Activators are mixed with the oxidant, Dilute Oxidation Technology is engaged, resulting in powerful cleaning with dramatically less chemical.

1. Fill mixing container with 1 gallon of water for every gallon of Dot you need. For best results, use hottest available water.

2. Pour Side A contents of all pouches into the water. Stir powder vigorously until fully dissolved. For best results, use a power drill with a paint mixer attachment.

3. Pour Side B contents of all pouches into mixed solution. Stir vigorously until fully dissolved.

4. Pour Dot Cleaner into your preferred spraying equipment. (Powered Systems are recommended for tough jobs).

   1. (Optional) If mixing quarts, the Side A may be added to a spray bottle and allowed to sit for 5-10 minutes during setup. Then, add in Side B and shake vigorously for about 1 minute. Shake periodically during use.